How to Enable PXE Option in BIOS for all OPS Computers


Below are directions to enable PXE boot for OPS models: XJ-0781, WB5051, and WB5072.

Please scroll down further to view instructions for OPS model: S044P722.


1. Power on OPS and boot into Bios using the onscreen instructions.

2. Select the “Boot” Tab and navigate to “CSM parameters.”

3. Under “Launch PXE OpROM policy”, change the default setting and enable Legacy Only.

4. Click Save Changes and Exit.




Below are directions to enable PXE boot for OPS models: S044P722.

1. Power on OPS and boot into Bios using the onscreen instructions.

2. Select the “Advanced” Tab and navigate to “CMS Configuration.”

3. Under “Legacy PXE ROM”, change the default setting and enable Legacy Only.

4. Click Save Changes and Exit.



For additional questions, please contact support at 833-469-9520 or send an email to support@newline-interactive.com.