How to Enable PXE Option in BIOS on an OPS - Modular Windows Computer 

Below is an article on how to access the PXE option within the BIOS menu of the OPS computers. 


For OPS models starting with S044, WB7B, WB5A, and WB5B

  1. Power on OPS and boot into Bios using the onscreen instructions.
  2. Select the “Advanced” Tab and navigate to “CMS Configuration.”
  3. Under “Legacy PXE ROM”, change the default setting and enable Legacy Only.
  4. Click Save Changes and Exit.


For OPS models starting with XJ-0781, WB5051, and WB5072

  1. Power on OPS and boot into Bios using the onscreen instructions.
  2. Select the “Boot” Tab and navigate to “CSM parameters.”
  3. Under “Launch PXE OpROM policy”, change the default setting and enable Legacy Only.
  4. Click Save Changes and Exit.


Subscribe to our Tech Notes - Newline Tech Notes and Firmware Updates (newline-interactive.com) 

For additional questions, please contact support at 833-469-9520 or submit a ticket via our portal at: Submit a ticket : Newline Technical Services (freshdesk.com)